27
Installing servers on the local network
SAGEM F@st™ 1400 / 1400W
• Click on
LAN Servers
in the
Basic
menu.
The screen opposite will be
displayed.
Configuring the modem/router in order to be able to use
servers on the local network
1
INSTALLING SERVERS ON THE LOCAL
NETWORK
Installing servers on the local network or using certain Peer-to-Peer software programs
requires an additional configuration of your modem/router.
This configuration must be carried out once for each server or computer which uses a
Peer-to-Peer software program. To do that, the connection with your Internet Service
Provider must be set up (meaning that you are able to surf).
• Click on
Add
.
The screen opposite will be
displayed:
• Indicate the name of your
server in the
Server Name
field
(e.g.
MyServerHTTP
).
• Set
Access Activated
to
Yes
.
• Indicate the protocol and port
being used by your server.
Refer to the table below for
further information.
• Indicate your server’s local IP address.
• Click on
Apply
.
• Save by clicking on
Save
button.
You can now access your server from the Internet.
