9
Configuring the modem/router
SAGEM F@st™ 1400 / 1400W
CONFIGURING THE MODEM/ROUTER
Preliminary configuration
1
You can configure your modem/router via its HTTP configuration interface. This interface is
visible from your Web browser.
This chapter describes the steps making possible:
• access to this HTTP configuration interface,
• configuration of your Internet account on the modem/router,
• access to the Internet.
The SAGEM F@st
TM
1400/1400W is a router. It contains the parameters of
your ADSL subscription. It is therefore pointless carrying these parameters over
into the properties of your computer.
You are recommended to check that the Internet
browser of each computer is configured in the following
way:
Internet Explorer, for example
In the
Tools
menu, click on
Internet Options
.
In the
Connections
tab, select "Never dial a
connection".
Choice of the port for the modem/router configuration
2
The modem/router has 2 ports which enable you to configure it:
• 1 Ethernet port,
• 1 USB port.
If your computer is provided with an Ethernet card, we recommend that it be configured via
the Ethernet port. Should this not be the case, you may use the USB port.
