background image

5

Y

OUR TELEPHONE

Handset set-up

Insert the batteries one after the other in
compliance with the battery polarity, as
shown on the label in the telephone set.
Place the cover back on the handset by
pushing upwards until it is completely closed.

Remove the protective film on the screen,
place the handset on the base to fully charge
the batteries.

A beep is transmitted by the handset and the
charging icon appears on the screen, it
indicates the charging status. When icon is
completely shaded (4 bars), your batteries
are charged.

Telephone set turning on and off

To turn off the telephone set, hold down the 

C

 key. Your telephone set is now switched off.

To turn on your telephone set, hold down the 

C

 key. Information is displayed on the screen.

The battery charging indicator icon, the telephone set number (1 or 2), the name of handset,
the time and the range indicator.

Only use certified rechargeable batteries. For optimal battery charge, leave 
the handset on the base for at least 6 hours during initial use. During 
charging, the batteries may heat up, this is quite normal and without risk.

Never put the handset without its batteries on the base when the latter is 
powered on. 

Do not leave the handset off with its inserted batteries more than a few days 
to avoid damaging them.

Содержание D23XL





































Отзывы: