Sagem D20V Скачать руководство пользователя страница 25

Страница: 25 / 44

EGISTRATION

Registering an additional
handset to a base

To register an additional handset to a base
you must:
•

put the handset in registration mode,

•

put the base in registration mode.

Once this is done, the registration (mutual
recognition of the base and the new handset)
will be done automatically (registration can
take a few seconds).

Pick up the handset which you want to
register:

On the navigator key

, press or until

the

REGISTRATION

screen is displayed,

press

to confirm.

Select

REGISTER HS

using or . Press

Select the base station number by pressing a
corresponding key (1, 2, 3 or 4).

Enter the code of the base station (0000 by
default setting) which the handset is to be
registered on to. Press

The handset enters the registration mode.

Five SAGEM D20 handsets can be
logged on to one base station.
A handset can be logged on to up to
four different base stations.

On the base:

Put the base to which you want to link the
telephone set in registration mode and press
the base button for several seconds.

The green light blinks rapidly, the base is in
link mode during 3 minutes maximum.

The new handset and the base are mutually
searching for each other. The link may take
from several seconds up to three minutes.

Once the handset is registered, you will hear
an acoustic signal and the number assigned
to the handset is displayed at the left of the
screen.

The handset and the base then automatically
quit the pairing mode.

To exit the menu, press the red key

Modifying the base preference

This function enables you to specify which
base will be used by your handset to make
calls (if your handset is registered to several
bases).

On the navigator key

, press or until

the

REGISTRATION

screen is displayed,

press

to confirm.

If the handset put out an irregular
acoustic signal, pairing has aborted.
Press the red key

Disconnect and re-connect the
power supply cord of the base and
repeat the procedure.

LU 252117222C_D20V_EN.book Page 25 Mercredi, 24. août 2005 11:46 11

Содержание D20V













































Результаты поиска

Содержание D20V

Отзывы:

Похожие инструкции для D20V

Бренды по названию

Популярные бренды

Sagem D20V, Руководство пользователя

Результаты поиска

Содержание D20V

Отзывы:

Похожие инструкции для D20V

Бренды по названию

Популярные бренды