Sagem D20V, Руководство пользователя

Страница: 22 / 44

22
B
ASE SETTINGS
B
ASE SETTINGS
Modifying the default base ring
volume
On the navigator key , press or until
the BASE SET screen is displayed, press
OK to confirm.
Select RING VOLUME using or . Press
OK .
Press or to increase or decrease the
default volume. Once the volume is set,
press
OK .
To exit the menu, press the red key .
Modifying the base ringtone
This menu enables you to associate a
ringtone to incoming calls and internal calls
(intercom).
On the navigator key , press or until
the BASE SET screen is displayed, press
OK to confirm.
Select RINGTONE using or . Press OK .
Select the desired ringtone using or .
Press
OK .
To exit the menu, press the red key .
The base is equipped with a buzzer
which transmit beeps during the
reception of a call.
Modifying the flash duration
(R key)
If you connect your telephone to a private
automatic branch exchange or use it in a
foreign country, you may need to modify the
flash duration in order to use your telephone
correctly.
Contact your service provider to obtain the
correct flash duration and then modify it by
doing the following. Five preprogrammed
durations are proposed on the list, the
correspondence between the number of the
list and the duration is the following :
On the navigator key , press or until
the BASE SET screen is displayed, press
OK to confirm.
Select FLASH DURA using or . Press
OK .
An information screen presents the current
flash duration.
•
To keep the same time, press C key.
• To modify the time, select the new flash
time using or . Press
OK .
To exit the menu, press the red key .
number
corresponding
duration
1 80 ms
2 100 ms
3 180 ms
4 300 ms
5 600 ms
LU 252117222C_D20V_EN.book Page 22 Mercredi, 24. août 2005 11:46 11