Sagem D20V, Руководство пользователя

Страница: 19 / 44

19
H
ANDSET SETTINGS
Activating or deactivating the
beeps
On the navigator key , press or until
the HS SET screen is displayed, press OK to
confirm.
Select BEEPS using or . Press OK .
Select the beep type using or . Press OK .
KEYPAD PRESS : the handset beeps when a
key is pressed.
BATTERY LOW : the handset beeps when
the battery is too low.
OUT OF RANGE : When the base station is
out of range, the handset will warn you
acoustically.
An information screen displays the beep
status (ON or OFF) for the selected item.
•
To change the status, press or .
Press
OK .
• To keep the status, press C .
To exit the menu, press the red key .
Modifying the default handset
melody volume
On the navigator key , press or until
the HS SET screen is displayed, press OK to
confirm.
Select MELODY VOL using or . Press
OK .
There are seven alternatives in succession to
choose from: :
•
VOL OFF : No ringing tone.
• VOLUME : X : From 1 to 5.
• CRESCENDO : The volume of the ring
tone increases with every ringing
sequence.
Press or to increase or decrease the
default volume. Once the volume is set,
press
OK .
To exit the menu, press the red key .
Modifying the handset ringtone
This menu enables you to associate a
ringtone to incoming calls or internal calls
(intercom).
On the navigator key , press or until
the HS SET screen is displayed, press OK to
confirm.
Select EXTERNAL CALL or INTERNAL
CALL using or . Press OK .
Select the desired ringtone using or .
Press
OK .
To exit the menu, press the red key .
Setting the ear volume
During communication, you can
increase or decrease the audio
volume of your handset by pressing
the or key on the navigator.
H
ANDSET SETTINGS
LU 252117222C_D20V_EN.book Page 19 Mercredi, 24. août 2005 11:46 11