SAGEM F@st™ 2604/2644
10
4 TroubLEShooTInG
users can locate the fault using the following sources:
status of the leds on the front,
information accessible by your router’s built-in «dsl router» http controller,
router supervision,
«diagnostics» tools.
4.1 STATuS oF ThE LEDS on ThE LEFT oF ThE
FronT pAnEL
Status
Colour
Lit
steady
Green
power on
adsl up
Wi-Fi
activated
a ppp session has been
created
Amber
x
x
x
adsl link is established
Flickering
Green
x
x
Wi-Fi tx/rx
Tx/Rx traffic
blinking
Amber
x
x
x
adsl is training
Slow
blinking
Green
x
line not detected
Wi-Fi pairing
x
Fast
blinking
Green
x
adsl synchronisation
training
x
x
off
Green
power off
x
Wi-Fi
deactivated
power off
or
bridge mode
or
adsl down
4.2 STATuS oF ThE LEDS on ThE rIGhT oF ThE
FronT pAnEL
Status
Colour
1
2
3
4
Lit on steady
Green
ethernet port (eth1, eth2, eth3 or eth4) has detected a link with
100 mbps device
Flickering
Tx/Rx traffic at 100 Mbps
Lit on steady
Amber
ethernet port (eth1, eth2, eth3 or eth4) has detected a link with
10 mbps device
Flickering
Tx/Rx traffic at 10 Mbit/s
off
x
no link detected on the ethernet port
252987009-A_GIR_2604-2644 (gb).i12 12
22/05/2008 13:35:34
