20
CLEANING THE CONICAL BURR GRINDER
This grinder cleaning cycle removes oil build-up on the burrs which can impede performance.
Unlock hopper
Empty hopper
Replace hopper
Lock hopper
Run grinder
empty
Unlock hopper
Remove hopper
Remove top burr
Unlock top burr
Clean top burr
with brush
Clean lower
burr with brush
Clean chute
with brush
12
3
7
5
PUSH
2
11
10
99
88
LOCK
ALI
GN
4
1
6
ADVANCED CLEANING FOR THE CONICAL BURR GRINDER
This step is only required if there is a blockage between the grinding burrs and the grinder outlet.
Remove hopper
Set GRIND SIZE
to 1 (finest)
Use 10mm socket.
Rotate clockwise to
loosen the nut only
Set GRIND SIZE
to 30 (coarsest)
Unlock & remove
top burr
Remove nut, spring
& flat washer.
Carefully remove
lower burr
Remove grind fan
& washers
using long-nose
pliers
Insert & lock top
burr
Set GRIND SIZE
to 10. Replace &
lock hopper
Clean chute
with brush
Unblock the grinds
exit chute using the
brush or a pipe
cleaner
Insert washers &
grind fan using
long-nose pliers
Insert lower burr
(drive pin &
cavity to align).
Insert flat washer
& spring washer
Rotate counter-
clockwise to
tighten nut
12
TIGHTEN NUT
5
13
14
1
3
LOOSEN NUT
6
SPRING
WASHER
FLAT
WASHER
7
1. GRIND FAN
2. METAL WASHER
3. FELT WASHER
3
2
1
88
99
10
1. FELT WASHER
2. METAL WASHER
3. GRIND FAN
1
2
3
11
SPRING
WASHER
FLAT
WASHER
4
2
WARNING
Care should be taken as the grinder burrs are extremely sharp.
