11
EN
6. Under running water, clean the outside of the
juicing screw with a dish scrub. Use the tip
of the cleaning brush to push out any residue
in the crevices on the bottom of the juicing
screw.
Thoroughly clean the juicing screw ensuring
that the juicing screw is clean without any
residue. Thoroughly dry the bottom of the
juicing screw. After juicing ingredients with
seeds, make sure to thoroughly clean the
bottom crevice of the juicing screw. (If this
area isn’t properly cleaned, it can cause the
part to be damaged).
7. Clean the body with a soft damp towel
and dry.
If the towel is dripping wet, make sure
to squeeze out the excess liquid before using
it on the juicer.
CLEANING SILICONE PARTS
Clean the rotation wiper under running
water. Thoroughly dry after cleaning. Before
assembling the top-set, ensure that the
compression silicone and silicone ring are
firmly inserted.
If the compression silicone and silicone ring
are not firmly inserted, juice may leak from the
bottom of the juicing bowl.
COMPRESSION SILICONE
Unplug to clean.
After cleaning, firmly insert into the slot below
the pulp spout.
SILICONE RING
Remove the silicone ring from the juicing bowl
to clean.
After cleaning, push in the silicone ring with the
smaller surface facing down.
SMART CAP
Remove from the juice spout to clean. After
cleaning, attach the smart cap to the smart cap
silicone on the juice spout.