background image

10

GENERAL OPERATION

• Check the water tank is filled with cold tap water 

up to the maximum mark.

• Plug the power cord into the power outlet.
• Press the POWER button. The POWER button 

will flash while the machine is heating. 

(Light will flash for up to 55 seconds while the 

machine is heating.)

When the correct temperature has been 

reached, the 1 CUP and 2 CUP buttons and 

the POWER button on the control panel will 

illuminate.

First Use Priming and Flushing the Machine
It is recommended to complete a water flushing 

operation to ensure the machine has been 

conditioned.
When the machine has reached STANDBY 

mode, run the following steps.
• Place a cup under the group head and press 

the 2 CUP button to run hot water through the 

group head.

• Place a cup under the hot water spout. Rotate the 

dial to “Hot Water” position and run water through 

the hot water outlet for 10 seconds.

• Position the steam wand over the drip tray. Rotate 

the dial to “Steam” position and activate steam for 

10 seconds.

• Discard the contents of the cup.
• Repeat this cycle 3 times. Discard the contents 

of the drip tray and refill the water tank up to the 

max line.

• Insert the portafilter into the grinding cradle, press 

and hold 'Dose' button for 3 seconds. Remove 

the portafilter and discard any grinds.

NOTE

• Top up the water daily. The water tank should be 

filled with fresh, cold tap water before each use.

• DO NOT use highly filtered, demineralized, or 

distilled water in this machine. This may affect 

the taste of the coffee.

FILTER BASKETS

This machine includes both single and dual 

wall, 1 CUP and 2 CUP filter baskets.
Use the 1 CUP filter basket when brewing a 

single cup and the 2 CUP filter baskets when 

brewing 2 cups or a stronger single cup or mug.
Adjust the grind amount and size if switching 

from a single basket to a double basket, or 

vice versa.
The provided filter baskets are designed for:
1 CUP filter basket = 8-11g
2 CUP filter basket = 16-19g
Single Wall Filter Baskets

1 CUP

2 CUP

Single Wall filter baskets should be used when 

grinding fresh whole coffee beans.
These allows you to experiment with grind and 

dose to create a more balanced espresso.
Dual Wall Filter Baskets

1 CUP

2 CUP

Dual Wall filter baskets should be used when 

using pre-ground coffee and older beans that 

are past the 30-day roast date.
These regulate the pressure and helps to 

optimize the extraction regardless of the grind, 

dose, or freshness.

Содержание Barista Express Impress SES876























Отзывы: