Sage Barista Express BES875 Скачать руководство пользователя

Страница: 14 / 18

The storage tray (located behind the drip tray)

can be removed and cleaned with a soft, damp

cloth. Do not use abrasive cleansers, pads

or cloths which can scratch the surface.

NOTE

All parts should be cleaned by hand using warm

water and a gentle dish washing liquid. Do not

use abrasive cleansers, pads or cloths which

can scratch the surface. Do not clean any of the

parts or accessories in the dishwasher.

CLEANING THE OUTER HOUSING

& CUP WARMING TRAY

The outer housing and cup warming tray can

be cleaned with a soft, damp cloth. Polish with

a soft, dry cloth. Do not use abrasive cleansers,

pads or cloths which can scratch the surface.

STORING YOUR MACHINE

Before storing, ensure the STEAM / HOT

WATER dial is in the STANDBY position, press

the POWER button to switch the machine off

and remove the plug from the power outlet.

Remove unused beans from the hopper, clean

the grinder (see page 17), empty the water

tank and the drip tray.

USING THE ALLEN KEY

Over time, the silicone seal surrounding

the shower screen will need to be replaced

to ensure optimum brewing performance.
1. Press the POWER button to switch the

machine off and unplug the cord from the

power outlet.

2. Carefully remove the water tank and drip tray,

taking particular care if they are full.

3. Using a skewer or similar, clean the centre

of the screw of any residual coffee.

4. Insert the shorter end of the Allen Key into

the centre of the screw. Turn counter-clockwise

to loosen the screw.

WARNING

Do not immerse power cord, power plug

or appliance in water or any other liquid.

5. Once loosened, carefully remove and retain the

screw and stainless steel shower screen. Make

note of the side of the shower screen that is

facing downwards. This will make re-assembly

easier. Wash the shower screen in warm soapy

water, then dry thoroughly.

6. Remove the silicone seal with your fingers

or a pair of long-nose pliers. Insert the new seal,

flat side first, so the ribbed side is facing you.

7. Re-insert the dispersion plate, then the shower

screen, then the screw. With your fingers, turn

the screw clockwise for 2-3 revolutions then

insert the Allen Key to tighten until the screw

is flush with the shower screen.

8. Re-insert the drip tray and water tank.

Contact Sage Customer Service or visit

www.sageappliances.com for replacement

silicone seals or for advice.

Clean centre of screw

before inserting Allen Key

Содержание Barista Express BES875



















Результаты поиска

Содержание Barista Express BES875

Отзывы:

Похожие инструкции для Barista Express BES875

Бренды по названию

Популярные бренды

Sage Barista Express BES875, Руководство пользователя

Результаты поиска

Содержание Barista Express BES875

Отзывы:

Похожие инструкции для Barista Express BES875

Бренды по названию

Популярные бренды