7
ELECTRICAL CONNECTION
Plug the fire into a 16amp/230 Volt outlet. Be sure to have access to the plug after installation to allow for
disconnection. Ensure that the supply cable exits at the back of the fire at the right or left hand corner to suit
your supply socket location and is not trapped under the fire such that it might cause it to be damaged.
The appliance can be connected to the fixed wiring of the premises through a suitable connection box
positioned adjacent to the appliance. This electrical installation must be carried out by a competent electrician
and be in strict accordance with the current I.E.E. regulations for Electrical Equipment in Buildings.
The electrician can remove the supplied plug by the following:
1. Lift off the top plate and put switch
‘A’
into the off position (Fig. 27)
2. Ensure that the appliance is unplugged.
3. Lift off the access cover by removing the retaining screw (Fig. 6A).
