14
5.
For a M500, plug the link wire into the 3.5 mm jack housed in the plastic (Fig. 25). For a M1000 plug the
link wire into the 3.5 mm jack housed in the plastic on the left hand side module (Fig. 26).
6.
Repeat steps 3-5 above in order to connect subsequent products in the installation.
Once set up, any command sent to the first product will be sent to all subsequent products. Flame height
control and sound level control of the master product is matched for all subsequent products. If individual
flame height control is required, this can be done by using the on board flame height controls on the
product (Fig. 27).
