Ref.
Previous Ref.:
Date:
© Safran Data Systems
– IMP000074 e14r1
This document is the property of
Safran Data Systems
.
It cannot be duplicated or distributed without expressed written consent.
Page 70
In the picture here after, the FM discriminator gain of the demo
dulator n°3 has been set to “X8”. The
signal level at the bit sync input has been increased.
The FM discriminator gain is also taken into account on the video output. Thus in the previous
example:
With the FM discriminator gain set to nominal, the Video output level was 1Vpp maximum.
With the FM discriminator gain set to “X8”, the Video output level can be tuned to 4 Vpp.
Eye Diagram at the
input of the bit-sync 3.
FM discriminator gain
has been set to “X8”