14
Inventory
Each model incudes the saw frame, motor and counterbalance/counterweight. These items may be installed on
the saw or packaged in separate boxes. The C-Series saws include a separate box for the motor, counterbalance
and dust bonnet, (Fig.6 C-Series shown). Accessories may be packaged and included with saw frame or shipped
separately. Carefully remove and inspect all items before operation.
Figure 6: Packaged saw and boxes
Unpacking
1.
Removing plastic sheeting, protective cardboard, and wood crating. NOTE: Uncrating methods vary by model
and accessories.
Caution: Have a helper hold saw frame for the next steps.
2.
Remove wood crate by cutting (a reciprocating saw is used as an example) the wood frame along the
outside/back corners (Fig. 7) being careful not to damage panel saw. Cut around base. NOTE: Do not cut
through (across) crate base (Fig.8).
NOTE: 6400 Only, cut between block of wood and base of wood crate, supporting counter weight in back. This
will ease removal of wood block supporting counter weight.
Figure 7: Cutting back of wood crate
