Table of Contents
SafetyLink Anchor Handbook Extract
– LadderLinks - Version 11.18
Page 6 of 12
FIXED LADDERLINK
–
METAL ROOF LADDER SUPPORT BRACKET
INSTALLATION FOR METAL ROOFS
–
UNDER ROOF SHEETING
1.
To install the LadderLink simply remove existing hex head roofing screws along the bottom edge of the roof
sheeting at the desired location.
2.
Slide the ladder bracket under the roof sheeting between the sheeting and batten as shown in the diagram
below.
3.
Position the ladder bracket so the rolled section is centred over the gutters front edge.
4.
Once the ladder bracket is in the desired location, re-install the hex head roofing screws through the original
holes, through the ladder bracket and into the roof batten below.
5.
Ensure that a minimum of three (3) x 12g 65mm roofing screws anchor the ladder bracket to the structure
(recommended to pilot drill holes).
