background image

 

Table of Contents 

SafetyLink Anchor Handbook Extract 

– LadderLinks - Version 11.18   

Page 4 of 12 

WARRANTIES 

  

EXTRACT: SafetyLink Pty Ltd STANDARD TERMS AND CONDITIONS 

 

11.1        To the extent permitted by law all implied conditions, warranties and undertakings are expressly excluded. 

 

11.2        Except as provided in this clause the Company shall not be liable for any loss or damage, whether direct or 

indirect (including consequential losses or damage) arising out of any breach of contract by the Company or 
any negligence of the Company, its employees or agents. 

 

11.3        Should the Company be liable for a breach of a guarantee, condition or warranty implied by the Australian 

Consumer Law (not being a guarantee, condition or warranty implied by sections 51, 52 and 53 of that Law) 
then its liability for a breach of any such condition or warranty express or implied shall be limited, at its option, 
to any one or more of the following. 

 

 

A) 

in case of Goods 

(I)  the replacement of the Goods or the supply of equivalent Goods. 
(II)  the repair of the goods, 
(III)

 

the payment of the cost of replacing the Goods or acquiring equivalent Goods. 

(IV)

 

The payment of the cost of having the Goods repaired. 

Provided that any such Goods are returned to the Company by the Purchaser at the Purchaser’s expense.

 

 

 

B)  

in the case of services 

(i)  the supply of the services again, 
(ii)   the payment of the cost of having the services supplies again. 

 

 

11.4     

The Company will not liable for the costs of recovery of the Goods from the field, loss of use of the Goods, loss 
of time, inconvenience, incidental or consequential loss or damage, nor for any other loss or damage of her 
than as stated above, whether ordinary or exemplary, caused either directly or indirectly by use of the Goods.  

 

11.5 

The Company warrants that at the time of shipment, Products manufactured by it will be free from defects in 
material and workmanship.  In the absence of a modified written warranty, the Company agrees to making 

good any such defects by repairing the same or at the Company’s option by replacement, for a period of (1) 

one year from the date of shipment.  This limited warranty applies provided that:  

 

(a) 

defects have arising solely from faulty materials or workmanship; 

(b) 

the Products have not received maltreatment, inattention or interference; 

(c) 

the Products have been installed in accordance with the Company’s Installation Handbooks using 

only products supplied by the Company; 

(d) 

accessories used with the Products are manufactured by or approved by the Company; 

(e) 

the Products are maintained in accordance with Australian Standard 1891.4 (section 9). 

(f) 

you notify any claim under this warranty to SafetyLink in writing to the address below no later than 
14 days after the event or occurrence concerning the produce giving rise to the claim and you pay all 
costs related to your claim. 

 

This warranty does not apply to any defects or other malfunctions caused to the Goods by accident, neglect, vandalism, 
misuse, alteration, modification or unusual physical, environment or electrical stress. 

 

Please note that the benefits to the purchaser (as a consumer) given by this warranty are in addition to your other rights 
and remedies under the Australian Consumer Law.  Our goods come with guarantees that cannot be excluded under the 
Australian Consumer Law.  You are entitled to a replacement or refund for a major failure and compensation for any 
other reasonably foreseeable loss or damage.  You are also entitled to have the goods repaired or replaced if the goods 
fail to be of acceptable quality and the failure does not amount to a major failure. 

 

11.6 

If  any  goods  are  not  manufactured  by  the  Company,  the  guarantee  of  the  manufacturer  thereof  shall  be 
accepted by the Purchaser as the only express warranty given in respect of the goods. 

 

11.7

 

 Except  as  provided  in  this clause  11,  all  express  and  implied  warranties,  guarantees  and conditions  under 

statute or general law as the merchantability, description, quality, suitability or fitness of the Products for any 
purpose or as to design, assembly, installation, materials or workmanship or otherwise are hereby expressly 
excluded (to the extent to which they may be excluded by law).  

 

PLEASE SEE SAFETYLINK PTY LTD FULL STANDARD TERMS OF CONDITIONS OF SALE FOR FURTHER REFERENCE. 

 

Содержание LADFX001













Отзывы: