Safety Vision ICOP PRO, Руководство пользователя

Страница: 21 / 66

Exporting Video Files
Video files can be exported to a USB
thumb drive inserted into the USB port
on the front of the DVR.
Note: Users must be logged in as an
administrator in order to perform this
procedure.
To manually export video files, use the
following procedure:
1.
Select each file you want to export
in the SEL column.
2.
Insert a USB thumb drive into the
USB port on the front panel of the
DVR.
3.
Select the Export option on the
right side of the screen.
A Remark window appears.
4.
Select Sure.
A progress bar appears, as well as the
total number of files being exported.
5.
When the “Backup Successful” message appears,
select OK.
6.
Remove the USB thumb drive.
To automatically export alarm video files recorded the same
day as the present, use the following procedure:
1.
Ensure ON is selected in the EVENT FILES AUTO-
EXPORT (USB) field in the General menu.
2.
Insert a USB thumb drive into the USB port on the
front panel of the DVR.
3.
Press the F1 key on the remote control.
A message appears to indicate video is automatically
exporting to the USB drive. If no alarm video files are
present, a message will appear.
For video to be marked as alarm, the recording must be
initiated by a sensor configured as an alarm. For more
information about configuring a sensor as an alarm, see
page 33.
4.
When the “Backup Successful” message appears,
select OK.
5.
Remove the USB thumb drive.
If the amount of video being downloaded exceeds the
capacity of the USB thumb drive being used, a prompt
appears requesting that an additional thumb drive be
inserted to conclude the export.
Exported files are saved on the root directory of the USB
thumb drive. Files are titled first by Unit ID, then Alarm Log,
then the date recorded.
ICOP PRO USER GUIDE
19