Safety Vision ICOP PRO, Руководство пользователя

Страница: 16 / 66

ICPMICKIT Wireless Microphone
1 - Beep/Vibration Switch
- Use the Beep/Vibration
Switch to toggle notifications.
•
BEEP: audible beeps sound
•
VIB: unit is silent, vibrates for notifications
•
OFF: disables all sound and vibration notifications,
observe status LEDs for unit status
2 - Power Switch
- Use the Power Switch to turn the
microphone on and off.
3 - Record Button
- Use the Record button to start and
stop video recordings:
1.
Remove the microphone from the cradle and ensure
the power switch is in the ON position.
2.
Press the Record button once to begin recording.
The In-USE status LED displays green.
3.
Press the Record button once more to conclude re-
cording.
The In-USE status LED turns off.
4.
Replace the microphone in the cradle when not in use
or when the battery is low.
4 - Status LEDs
- The In-USE and Low Batt LEDs display
the microphone’s current status:
In-USE (green):
• Solid - video and audio is recording
• Flashing - microphone is close to going out of range of
the receiver
Low Batt (red):
• Solid - battery is low, return the microphone to the
cradle to recharge
• Flashing - voice recording is muted
5 - Mute Button
- Press the Mute button once during
a recording to mute voice recording (Low Batt status LED
flashes red). Press the Mute button once more to un-mute
voice recording.
6 - Ext. Microphone Port
- Attach an external lapel
microphone using a 2.5 mm connector.
14 ICOP PRO USER GUIDE