44
43
F. Installing Belt-Positioning Booster
1.
You
MUST
fasten the LATCH
belt hooks together behind
seat when using the vehicle
seat belts.
F-2
Installing Using the Lap and
Shoulder Belts
You
DO NOT
use a locking clip when using this seat as a belt-
positioning booster.
2.
Place Child Restraint
in Vehicle
Forward-Facing
Place child restraint
flush
against the back of the
vehicle seat
forward-facing
in the back seat. Tuck the
top anchorage strap (tether)
hook under the base.
Place Child in Seat
Child should sit with its back
and bottom flat against the
back of the child restraint.
3.
Buckle Lap and
Shoulder Belt
Lap belt should cross
the child’s thighs. The
shoulder belt should lay
snugly across the center
of the child’s shoulders
and across the chest (not
on the face or neck). Both
belts should be under the
armrest.
Pull up on the shoulder
belt to tighten.
6.
Position Headrest
Adjust the headrest so that
the middle of the child’s
head is below the top of the
headrest. Adjust if needed.
4.
To Adjust Harness/
Headrest Height
Squeeze the metal bar
on the back of the seat.
Move harness/headrest
adjuster up or down to any
position that correctly fits
your child. Release bar
into slot to lock.
5.
