23
24
C. Basic Use
4.
Thread Harness Strap
Thread the harness down
through slot on left side
of plastic shell
(1)
and up
through slot on right side
(2)
.
NOTE:
Make sure sewn end
of the harness strap loop
faces the buckle before
starting.
Take both ends of the
harness and make them
even in length.
NOTE:
Make sure harness
tightening strap is between
the harness strap and shell
as shown.
1
2
Thread Harness OVER
Metal Bar
Pull harness through the
back. Make sure the
harness goes OVER the
metal bar,
BETWEEN
metal
bar and plastic handle of the
harness/headrest adjuster.
6.
Attach Harness Straps
to Splitter Plate
Fit loops on harness ends
completely on
the splitter
plate.
7.
3
4
5
Thread harness straps
through each buckle tongue
(3)
. Thread the chest clip
(4)
. Do the same to the other
harness end.
Do Not twist
harness.
Push harness ends through
slots in headrest
(5)
.
5.
Harness system must be reattached correctly.
Failure to follow these warnings can result in
serious injury or death.
Failure to place harness over the metal bar,
between the metal bar and plastic handle, can
result in serious injury or death.
