35
E. Installing Forward-Facing
36
The top anchorage strap (tether) is used for the
forward-facing position only.
Note:
We strongly recommend that you use the top
anchorage strap (tether) in the forward-facing position.
If your vehicle does not have an anchor bracket, please
see your dealer or a qualified mechanic and have one
installed. The top anchorage strap can greatly improve the
performance of this child restraint.
Storage of Top Anchorage Strap:
When the top anchorage
strap is not in use, tuck the
top anchorage hook (tether)
under the base as shown.
E-2
Adjusting Top Anchorage Strap
(Tether)
Lift up to
loosen
To loosen;
Lift up on top
anchorage lock and push
lock toward top
anchorage hook.
To tighten;
After the child
restraint is locked into place
with LATCH or vehicle belt,
put knee in child restraint
and push down. Pull on free
end of top anchorage strap.
Pull loose
end to
tighten
To Adjust Top Anchorage Strap (tether):
E-3
Preparing to Install
LATCH Forward-Facing
Routing LATCH Belt
Insert the LATCH hook
through the forward-
facing belt path.
1.
Thread LATCH Across
Pull the LATCH hook
across the back and out
the other side as shown.
Do not twist the belt.
2.
E-4
Install Forward-Facing
With LATCH
Note:
Review your vehicle’s owner manual for LATCH belt use.
Do not use the LATCH system along with the
vehicle belt.
Check LATCH belt before each use. Use only if
the belt can be tightened properly and securely.
Failure to follow these warnings can result in
serious injury or death.
