background image

30

 D-2 

Vehicle Seating Position

Some seating positions in your vehicle may not be safe for 
this child restraint. Some vehicles do not have a seating 
position that can be used safely with this child restraint. If 
you are not sure where to place the child restraint in your 
vehicle, consult your vehicle owner’s manual or contact Dorel 
Juvenile Group Consumer Relations Department.

D. General Vehicle Installation

Use the child restraint only on vehicle seats 
that face forward. Do not use on seats that face 
the sides or rear of the vehicle.

Safety Tip:

Children are safer when 
properly restrained in 
rear seating positions 
than in the front seating 
positions.

According to National Highway Traffic Safety 
Administration information, children in rear 
seating positions are statistically safer, 
whether you have air bags, advanced air 
bags, or no air bags at all.

29

Vehicle Belts 

If LATCH is not an option, 
you must use the vehicle 
seat belt system to install 
the child restraint. There 
are some vehicle belts that 
will not work with a child 

restraint or will require special attention.

See next page and check your vehicle’s owner’s manual 
for specific instructions.

The LATCH System 

LATCH (Lower Anchors and 
Tethers for CHildren) is a 
universal system for installing 
child restraints without using 
vehicle seat belts.

The LATCH system can ONLY 
be used in vehicles that have 

the LATCH anchor bars installed and designated LATCH seating 
positions. Most vehicles manufactured after September 2002 are 
equipped with LATCH. 

Check your vehicle owner’s manual to see which seating 
positions may be equipped with the LATCH system.

 D-3 

Choosing LATCH or Vehicle Belts

LATCH Anchor Bars

Do not use both the LATCH belt and vehicle 
belt at the same time.

Содержание Summit Deluxe



























Отзывы: