5
6
Note:
Headrest MUST always be used when using backrest.
If headrest has been removed from backrest.
1.
Find Backrest
Connection Slot
Lift flap on seat pad as
shown to reveal backrest
connection slot.
2.
Attach Backrest to
Seat Base
Insert the hook on the
backrest into the backrest
connection slot.
Make sure backrest is laying flat (horizontal) when
connecting.
3.
Rotate Backrest Up Until It
Clicks into Place
Tuck seat pad flap under
backrest flap.
Attaching Backrest to Base
1.
Rotate Backrest Forward
or Back to Desired Position
The backrest should be flush
with vehicle seat back angle.
NOTE:
The backrest and headrest are removable. The
headrest and backrest must always be used together.
To use as a backed booster, attach headrest to backrest
and backrest to seat base, as follows.
With the back of the headrest
and backrest facing up, slide the
headrest into the track on the
back of the backrest.
Pull headrest adjuster lock out
and pull headrest down into a
locked position.
Attaching Headrest to Backrest
NOTE:
Make sure seat pad does not get caught between
the moving parts. The backrest may not connect properly
if the pad is in the way.
Adjusting Backrest
1.
Raise or Lower Headrest to
Selected Position
This booster seat has multiple
headrest positions. Grasp top of
headrest and push down with
one hand while pulling out on
the headrest adjustment lock
with the other.
Raise and lower headrest into
selected position. Release
the headrest adjustment lock
into one of the many headrest
heights.
Make sure headrest is locked by sliding headrest up and
down. Headrest may move slightly when it is locked.
Adjusting Headrest
