10
9
sewn
end
Check your child’s fit often.
If you cannot achieve a snug harness fit for your child,
see pages 13-14.
To learn how to check harness tightness,
see pages 19-20.
Check the harness straps often for any wear or damage.
5
From Back of Car Seat,
Attach Harness Strap Loops to
Splitter Plate As Shown
The sewn ends of the harness strap
loops
must
face towards you.
Do not
twist the harness strap or the
harness adjustment strap.
Make sure the harness strap loops are
fitted
completely on
both sides of the
splitter plate.
Fully Loosen Harness Straps
Push down on the harness release
lever (through the opening in the
pad) while pulling out on the harness
straps as shown.
Pull Harness Straps Out of
Shoulder Harness Slots
Rethread Harness Straps into
Correct Shoulder Harness Slots
for Your Child
For
Rear-Facing Child Fit
,
see page 8.
From Back of Car Seat,
Remove Harness Strap Loops
From Splitter Plate
1
3
4
2
Changing Harness Strap Position
