sewn
end
49
From Back of Car Seat,
Attach Harness Strap Loops to
Splitter Plate As Shown
The sewn ends of the harness strap
loops
must
face towards you.
Do not
twist the harness strap or the
harness adjustment strap.
Make sure the harness strap loops
are fitted
completely on
both sides
of the splitter plate.
The harness system must be installed correctly. Do not
use a child restraint with damaged harness straps.
10
Check your child’s fit often.
If you cannot achieve a snug harness fit for your child,
see pages 13-14.
To learn how to check harness tightness,
see pages 19-20.
Check the harness straps often for any wear or damage.
Aircraft Information
50
Install the car seat in a window seat to avoid blocking the aisle. If the
aircraft lap belt is too short, ask the flight attendant for a belt extender.
Use only on forward-facing aircraft seats.
Contact the airline for their specific policies.
Some airlines may ask to see a label stating
that this car seat is certified for aircraft use.
There is an airplane certification label
located on the side of this car seat as
shown.
Rear-Facing Aircraft Installation
Follow the steps on pages 38-40.
You can only install this child restraint in the
aircraft without the base.
This restraint is certified for aircraft use.
Thread Harness Straps into
Correct Shoulder Harness Slots
for Your Child
For
Rear-Facing Child Fit
,
see page
8.
9