14
13
From Top of Car Seat,
Lay Metal Retainer Flat
Against Shell As Shown
4
Replace Pad and Check Buckle
Pull up on the buckle to make sure it
is secured.
The buckle
must
not
pull out.
5
If you cannot achieve a snug harness fi t for your child,
you may need to adjust the buckle strap length
as shown in this section.
With Buckle in 1st Slot,
Turn Car Seat Over
If you need to move the buckle to
the 1st slot, see pages 10-11.
Pull Up Front of Car Seat Pad
Pull Buckle’s Metal Retainer
Towards You, Then Push It up
into Middle Buckle Slot As
Shown
2
1
3
Adjusting Buckle Strap Length
Check your child’s fit often.
To learn how to check harness tightness,
see pages 19-20.
Failure to place buckle’s metal retainer completely
through pad and shell can result in serious injury or death.
Harness System Adjustments
for Smaller Infants