32
31
Finished!
Check the tightness of the
install often to make sure it
has not loosened.
Only if necessary, you may need
to place a tightly rolled towel(s) or
foam pool noodle(s) under the front
of the base to help get the correct
recline.
Check often to make sure padding
is still in place and the belt is tight.
Before you begin installing the car seat
into your vehicle, did you check:
Remove Lower Anchor Belt
from Storage Attachments
1
Your child’s weight and height? See page 6.
Your child’s fi t? See page 8.
Do you need to make adjustments to the
harness strap position or the buckle position?
LATCH: Lower Anchor Belt Install
(1.8-4.9 kg)
4-11 lb
11-35 lb
(4.9-15.9 kg)
Check Angle Indicator
With your vehicle parked on level
ground, check the angle indicator.
The ball
must be
in the zone that
matches your child’s weight.
Redo the installation if the base is
not reclined correctly.
On select models: adjust the base if
needed, see page 16.
10
continued on next page