C-11
Removing Pad for Cleaning
You must remove the harness system to remove the
pad from the plastic shell.
Release the Pad Tabs
To release the tab, pull
down on the pad and pull
the tab out of the carrier.
Depending on your model,
unhook pad from the tabs at
the top of the carrier
(A)
.
1.
Remove Pad from Top
and Bottom
2.
C.
Basic U
se
29
30
A
Pull Buckle Through Pad
Remove pad.
3.
Replace child restraint pad by reversing order; Starting from
top of the child restraint, slip pad on plastic shell; insert
buckle and pull harness tightening strap through pad. Slip
pad over front of the plastic shell.
Attach all of the plastic tabs on the sides of plastic shell.
Rethread harness (see section C-12).
Cleaning Pad
Hand wash pad with warm sudsy water, rinse clean and air
dry. Spot clean the harness straps. Do not use bleach or
use other harsh cleaners. Do not dry clean or machine
wash.
Do not use child restraint without the pad.
4358-5480 US S1 onBoard Air 10/1/10 10:27 AM Page 31
