Adjuster
Route UAS Belt
Thread the hook through the
Rear-
Facing Belt Path
opening as shown.
The adjuster can be on either side of
the car seat.
The belt goes
:
• across the car seat;
AND
• under the car seat pad;
AND
• in front of the buckle;
AND
• out the other
Rear-Facing Belt
Path
opening.
Replace the seat pad around the
front of the car seat.
Do not twist belt.
Finished UAS Belt
Routing
1
2
5
36
35
Place Car Seat
Rear-Facing
in Back Seat
6
Check
Rear-Facing Level Line
For children between 2.3-10 kg
(5-22 lb),
the bottom level line on
the shell
must be
parallel with the
ground.
For children 10-18 kg (22-40 lb)
who can sit up unassisted,
rotate
the car seat between the 2 level
lines.
Start by making the bottom level line
parallel with the ground, then rotate
seat up.
Do not
rotate past the top
level line.
7
8
Attach UAS Hooks to Vehicle’s
UAS Anchors in Seat Bight
Review your vehicle owner’s manual
for UAS anchor locations and UAS
belt use.
Fasten one hook to one vehicle lower
anchor bar.
Then repeat for the second hook on
the other side of the car seat.
1
2
continued on next page