
49
50
F-3
Preparing to Install
LATCH Forward-Facing
Routing LATCH Belt
Insert the hook that has
the adjuster closest to
it, through the
forward-facing belt path.
1.
Thread LATCH Across
Pull the LATCH hook
across the back and out
the other side as shown.
Do not twist the belt.
2.
F. Installing Forward-Facing
F-4
Install Forward-Facing
With LATCH
NOTE:
Review your vehicle’s owner manual for LATCH belt use.
1.
Do not use the LATCH system along with the
vehicle belt.
Check LATCH belt before each use. Use only if
the belt can be tightened properly and securely.
Failure to follow these warnings can result in
serious injury or death.
continued on next page.
NOTE:
Pull the LATCH belt out of the rear-facing belt path if you
have used this child restraint rear-facing.
Place Child Restraint in
the Back Seat
Forward-Facing
Place child restraint
flush
against the vehicle seat
back
forward-facing
.
Only use the recline
position to install the child
restraint flush against the
back of the vehicle seat.
Hook LATCH to
Vehicle Anchor
Fasten one LATCH belt
hook to the anchor in
the vehicle seat bight.
Repeat for other side of
child restraint.
2.
Installation Tip:
Loosely attach
the tether hook
before attaching
the LATCH belt.
Consult vehicle’s
owner manual for
specific location.
Do not use the lower anchorage system
(LATCH system) to attach this child
restraint when restraining a child weighing
more than 40 lbs (18 kg) with the internal
harnesess of the child restraint.
4358-6549 Elite 65 S1.indd 51-52
4358-6549 Elite 65 S1.indd 51-52
1/24/14 3:40 PM
1/24/14 3:40 PM