SafeNet Luna SA Скачать руководство пользователя

Страница: 7 / 109

PREFACE About the Configuration Guide

The information, processes, and procedures contained in this document are intended for use by trained and qualified
personnel only.

It is assumed that the users of this document are proficient with security concepts.

Document conventions

This document uses standard conventions for describing the user interface and for alerting you to important information.

Notes

Notes are used to alert you to important or helpful information. They use the following format:

Note:

Take note. Contains important or helpful information.

Cautions

Cautions are used to alert you to important information that may help prevent unexpected results or data loss. They use
the following format:

CAUTION:

Exercise caution. Contains important information that may help prevent

unexpected results or data loss.

Warnings

Warnings are used to alert you to the potential for catastrophic data loss or personal injury. They use the following
format:

WARNING! Be extremely careful and obey all safety and security measures. In this
situation you might do something that could result in catastrophic data loss or
personal injury.

Command syntax and typeface conventions

Format

Convention

bold

The bold attribute is used to indicate the following:

•

Command-line commands and options (Type dir /p.)

•

Button names (Click Save As.)

•

Check box and radio button names (Select the Print Duplex check box.)

•

Dialog box titles (On the Protect Document dialog box, click Yes.)

•

Field names (User Name: Enter the name of the user.)

•

Menu names (On the File menu, click Save.) (Click Menu > Go To > Folders.)

•

User input (In the Date box, type April 1.)

Luna SA Configuration Guide

Содержание Luna SA













































































































Результаты поиска

Содержание Luna SA

Отзывы:

Похожие инструкции для Luna SA

Бренды по названию

Популярные бренды

SafeNet Luna SA, Руководство по настройке

Результаты поиска

Содержание Luna SA

Отзывы:

Похожие инструкции для Luna SA

Бренды по названию

Популярные бренды