SafeNet Luna SA страница 34 Скачать руководство пользователя | Manualshive

Страница: 34 / 109

background image

CHAPTER 2 Configure the Luna Appliance for your Network

If desired,

lunash:> status time

and/or

lunash:> status zone

can also be used.

2.

If the date, time, or timezone are incorrect for your location, change them using the

lunash sysconf

command.

For example:

lunash:> sysconf timezone set Canada/Eastern

Timezone set to Canada/Eastern

Note:

You must set the timezone before setting the time and date, otherwise the timezone

change adjusts the time that you just set.

Note:

For a new Luna SA appliance, or for one that has been factory reset, the steps occur in

the order presented here [set the date and time, configure the IP, generate certs, connect,
initialize the HSM...]. However, if the Luna SA has been used before, then it might have been
initialized with the option ."-authtimeconfig", which requires that the SO/HSM-Admin be logged
in before you are allowed to set time/timezone. If that is the case, then you will need to log in
with the old SO credentials, or initialize the HSM first, before you can set time and timezone.

Timezone Codes

A list of timezone codes is provided in the

Appliance Administration Guide

.

If a code is depicted in the list as a major name (such as Canada) followed by a list of minor names (such as city
names), then you write the major name, followed by a forward slash (“/”) followed by the minor name.

The code that you must apply from the list in the appendix may not look exactly like the code displayed by
“

status date

”. For example, “

status date

” shows EDT (i.e., Eastern Daylight Time), but to set that you

must type "EST5EDT", or “Canada/Eastern” or “America/Montreal” – a number of values produce the same
setting.

3.

Use

sysconf time

to set the system time and date, <HH:MM YYYYMMDD> in the format shown.

Note that the time is set on a 24-hour clock (00:00 to 23:59).

lunash:> sysconf time 12:55 20140410

Sun April 10 12:55:00 EDT 2014

Possible alternate scenario

While attempting to set the time or zone, you might encounter a message saying that you must log into the HSM first.

lunash:>sysconf timezone set Europe/London
This HSM has been initialized to require that the SO is logged in

prior to running this command.
Verifying that the SO is logged in...
The SO is not currently logged in.

Please login as SO and try again.

That message appears only if the HSM has been previously initialized with the "-authtimeconfig" option set. The work-
around at this stage is to run the command

hsm init -label <yourlabeltext>

without the "-authtimeconfig"

option, which releases that flag. That is, you can just skip ahead in these instructions and perform your intended
initialization out of order, and then set the appliance time and zone, and carry on.We chose an order for these

Luna SA Configuration Guide

Release 5.4.1 007-011136-007 Rev C July 2014 Copyright 2014 SafeNet, Inc. All rights reserved.

34

«
...
32
33
34
35
36
...
»

Содержание Luna SA














































































































Отзывы:

Нет отзывов

Похожие инструкции для Luna SA

Express5800/T110g-S

Бренд: NEC Страницы: 34

UniServer R6900 G5

Бренд: H3C Страницы: 83

Бренд: Avaya Страницы: 19

LUXOMAT net ViSTATION

Бренд: B.E.G. Страницы: 4

Бренд: TYANO Страницы: 68

Бренд: Axel Страницы: 28

Бренд: IBM Страницы: 36

DiskStation Series

Бренд: Synology Страницы: 6

iPlanet Web Server

Бренд: Sun Microsystems Страницы: 62

SUPERSERVER 1028UX-CR-LL1

Бренд: Supermicro Страницы: 128

Бренд: NEC Страницы: 10

Бренд: Intergraph Страницы: 102

Бренд: EVS Страницы: 87

ReadiManagerSE200

Бренд: Polycom Страницы: 4

Бренд: Satel Страницы: 8

Бренд: Silicon Graphics Страницы: 62

Бренд: Silicon Graphics Страницы: 70

Бренд: Lantronix Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды