SafeNet HighAssurance 4000, Руководство пользователя

Страница: 82 / 97

Commands
Chapter 6. CLI Command Reference 82
snmp-server
Attributes all – displays a concatenation of the information
provided by the show attributes listed below ( date
through version ). For technical support use only.
date – displays the internal clock’s date and time
settings.
http – displays the HTTP state on the management
port.
interface [all] – displays management interface
addresses and traffic statistics. The all attribute
displays the same information for the management,
remote, and local interfaces.
ip addresses – displays the remote, local, and
management port IP addresses.
ipSec aesSupport – Displays whether AES is
supported on the installed hardware.
ipSec discards [all] – displays information about
discarded packets.
ipSec encryption statistics [clear] – displays
encryption and decryption packet counts and discards.
The clear attribute resets counters to zero after they
are displayed.
ipSec sa – displays the details of the active security
associations.
ipSec spd [all] – displays a summary of the security
policy database. For technical support use only.
ipSec statistics [clear] – displays statistics about
transmitted and received IPSec packets. The clear
attribute resets counters to zero after they are
displayed.
logging – displays the logging parameters and their
state, and the name and size of the current log file
.
nvram:config – displays the saved HA4000
configuration’s details. Available to Administrator users.
system:running – displays the running HA4000
configuration’s details. Available to Administrator users.
version – displays version information.
Reboot Required No.
Usage Guidelines See “View Configurations” on page 39 and “Diagnostic
Commands” on page 56.
Syntax [no] snmp-server
{community <communityStr> {ro | rw}} |
{contact <contact_arg>} |
{location <location_arg>} |
{name <name_arg>} |
{trap <trap_args>}
Shortcut None