7
Hisselektronik
www.safeline.se
Step 15:
SEND ALL
CHANGES TO
SAFELINE ?
A=YES B=NO
Press “A” to send
all changes to the
telephone.
Press “B” to save
everything in the hand
unit.
The cable must be
connected to the telephone
when the changes are sent.
Step 16:
<------------------------>
FINISHED !
POWER OFF AND
DISCONNECT
CABLE
Turn off the power and
disconnect the cable
After about 8 seconds the
text will start from Step 1
Example on how to simplify the programming:
At repetition programming only the alarm-codes need to be changed.
If battery alarm is not used, only alarm-code 1 is needed.
Step by
step…
The display
shows:
Explanation:
Next to do:
Tip:
Turn on the
power
Handunit for
Safeline 1000/2000
-----------------
Version 1.15
After about 3 seconds
the next text will show.
Step 2:
_
ALARM CODE 1 =
#=NEXT D=HELP
Write the 8-digits P100/
CPC alarm-code given
to you by your alarm-
receiving operator.
This is the “Primary
code”.
This code to be used for
lift alarm.
Press ”#” to go
to next text
Step 3:
_
ALARM CODE 2 =
#=NEXT D=HELP
Write the second 8-digits
P100/CPC alarm-code
given to you by your
alarm-receiving operator.
This is the “Secondary
code”.
This code to be used for
battery alarm.
Press ”C”
to fi nish the
programming.
The cable need to be
connected only when the
changes are sent.
Step 15:
SEND ALL
CHANGES TO
SAFELINE ?
A=YES B=NO
Press “A” to send
all changes to the
telephone.
The cable need to be
connected only when the
changes are sent.
Step 16:
<---------------------
------>
FINISHED !
POWER OFF AND
DISCONNECT
CABLE
Turn off the power and
disconnect the cable.
After about 8 seconds the
text will start from Step1.
Simplifi ed programming
Содержание 1000
Страница 1: ...Manual Eng v2 01 SafeLine 1000...