Safeline 1000, Руководство пользователя, Страница: 6 / 16

4
Hisselektronik
www.safeline.se
Hints
To disconnect a vocal connection the receiving party should press “9” or “#”
otherwise the line will be busy up to 90 seconds after the call is completed.
To call the lift telephone just call the connecting telephone number, the
telephone will automatically answer after two signals.
Disconnect after the call is completed by pressing “9” or “#”.
To call the lift telephone if more then one phone is connected in series:
The telephones must be programmed with different unit numbers (see
programming). When calling to the lift, the telephone will answer after 2 signals,
chose the unit number that corresponds with the telephone you want to call.
Ex: You want to talk to unit number 3.
Call the telephone number, and when the telephone answers, press “3”
repeatedly on your dialtone telephone or mobile telephone, until you hear 2
distinctive calling tones –witch indicates that the call is connected to the right
telephone.
Disconnect after the call is completed by pressing “9” or “#”.
If it does not work, check:
Is there a connection?
Is there power?
- The diode lamp should be fl ashing.
Is there any telephone number programmed?
- Check with the hand unit.
Is there any alarm code programmed?
- Check with the hand unit.
Is it calling the right number?
- Check by calling on a regular phone.
Has the alarm-receiving operator the right equipment?
- Check with the operator.