Safeline 1000, Руководство пользователя, Страница: 8 / 16

6
Hisselektronik
www.safeline.se
Step by
step… The display
shows: Explanation: Next to do: Tip:
Step 5: _
TEL.NUMBER 2 =
#=NEXT D=HELP
Write the 2:nd telephone
number you want to call
in case of emergency
alarm. Press ”#” to go to
next text Telephone number 2 are
normally P100-numbers. To
change Alarm type press “B”.
Step 6: _
TEL.NUMBER 3 =
#=NEXT D=HELP
Write the 3:rd telephone
number you want to call
in case of emergency
alarm. Press ”#” to go to
next text Telephone number 3
and 4 are normally voice
connection. To change Alarm
type press “B”.
Step 7: _
TEL.NUMBER 4 =
#=NEXT D=HELP
Write the 4:th telephone
number you want to call
in case of emergency
alarm. Press ”#” to go to
next text Telephone number 3
and 4 are normally voice
connection. To change Alarm
type press “B”.
Step 8: _
TEL.CODE TO
MINICALL
#=NEXT D=HELP Write the code that is to
be sent to a beeper. Press ”#” to go to
next text This code will show on the
beeper’s display.
Step 9: _
TEST ALARM/
STATUS
TEL. NUMBER.
#=NEXT D=HELP Write the telephone
number that will receive
test alarm and status
report. Press ”#” to go to
next text If no telephone number is
given, there will be no test
alarm sent.
Step 10: _
DAYS BETWEEN
TEST ALARM
#=NEXT D=HELP Write number of days
between test alarms.
It could be 1-99 days Press ”#” to go to
next text If the value is set to “0” no
test alarm will be sent.
Step 10B: CALLTONES
BEFORE ANSWER
#=NEXT D=HELP Write number of calltones
before telephone answers
00-16 is accepted by
telephone,
2 digits must always be
written. Press ”#” to go to
next text If it is set to ”00”
The telephone will never
answer.
Step 11: _
SUPERV. ALARM
TEL. NUMBER.
#=NEXT D=HELP Write the telephone
number that will receive
the supervision alarm
(only for Safeline 2000) Press ”#” to go to
next text Breakdown alarm can only
be sent if there is a special
Breakdown alarm card
mounted in the unit *
Step 12: _
BATTERY ALARM
TEL. NUMBER.
#=NEXT D=HELP Write the telephone
number that will receive
the battery alarm. The
battery condition is check
once per week. It is done
by discharging the battery
and measures the battery
voltage. (only for Safeline
2000) Press ”#” to go to
next text The battery alarm sends the
secondary alarm-code as
identifi er.
Step 13: _
SET/CHANGE
PASSWORD
#=NEXT D=HELP Write the password to be
used when programming/
confi guring from an
external telephone or with
our PC-software * Press ”#” to go to
next text A maximum of 9 telephones
can be coupled on the
same line with “cascade
connections”
Step 14: _
SET/CHANGE
UNIT ADDRESS
#=NEXT D=HELP Write the address to the
telephone in question, if
you connect more than
one telephone on the
same line. Press ”#” to go to
next text 9 telephones can be coupled
on the same line with
“cascade connections”with
full functionality, if skipping
unit address up to 25 units in
series can be coupled.
Programming with hand unit