4.
Pull two vehicle belt loops up
through top of seat cover as
shown.
D
5.
With bottom of child restraint
facing up, grasp harness bracket
as shown and push through seat
base.
E
Repeat with four additional harness
brackets including harness buckle
bracket.
6.
Remove harness including buckle
and buckle pad.
7.
Store harness and cover assembly
together in clean, dry location
(preferably in original box or travel
bag).
BOOSTER
M
od
e
������������������
D
�
�
�
�
�
E
54
Converting to Booster Mode
cont’d.
���������������������
F
55
8.
Attach shoulder belt positioner.
• Insert loop end of strap through
rear harness bracket opening in
seat base.
F
• Pass the clamp end of the strap
through the loop end
G
and
pull clamp end up.
H
IMPORTANT NOTE:
The
shoulder belt positioner must be
attached to the opening in the
seat base on the side closest to
where the shoulder belt contacts
the child’s shoulder.
• To remove vehicle shoulder belt
positioner, reverse steps above.
������������������
G
������������������������������������
H
After conversion is complete,
see page 56,
Installation of Booster
Mode in Vehicle.
Содержание HARNESS
Страница 1: ......
