SafeGuard Go HARNESS, Инструкция по эксплуатации

Страница: 18 / 40

32 33
7.
Position harness loosely against vehicle
seat.
H
8.
Prepare the tether:
Tether use is required. The harness can
NOT be used without the tether.
• To lengthen tether, push tether
adjuster button and pull tether strap
as shown.
I
• ALWAYS route tether strap under
vehicle headrest and between
headrest posts whenever possible.
J1
• If tether strap can not be routed
under vehicle headrest, route strap
either around or over headrest.
J2
or
J3
�����������������������������������������
H
I
32
Lap-Shoulder Belt cont’d.
N
9.
Secure the tether.
• Secure the tether hook to the
vehicle tether anchor.
K
• Pull free end of tether strap to
tighten and remove any slack.
L
• Check to be sure tether is tight &
secure.
• Tightly roll or fold excess tether
strap, attach the Velcro
®
strip, and
place out of the child’s reach to
avoid a strangulation hazard.
M
10.
Check for secure installation.
• Grasp child restraint at rear of arms
as illustrated. Pull forward and side-
to-side on the child restraint.
N
• The installation is secure if the child
restraint does not move more than
1 inch in any direction.
K
�����������������
L
���������������������
M
33
HARNESS
M
OD
E
J1
�������������������
J2
�������������������
J3