1. SPECIAL NOTES
Disclaimer
We reserve the right to revise or remove any content in this manual at any time. We do not warrant or assume any
legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The content of this
manual is subject to change without notice. For the actual display and operation, please refer to your DVR in
hand.
VGA Output Resolution Support
Model 1 and Model 2 have VGA interface built-in, and users are allowed to change the resolution depending on
their display monitor.
Go to “ADVANCE”
“DISPLAY”, and move to “VGA OUTPUT” to select the VGA resolution you want. There are
seven options as follows:
1) 800 x 600
2) 1024 x 768 (default)
3) 1280 x 1024
4) 1440 x 900
5) 1400 x 1050
6) 1680 x 1050
7) 1600 x 1200
Note: To have the best image quality on your LCD monitor, make sure (1) the selected DVR VGA output
resolution is supported by your monitor, and (2) the VGA output settings on both the LCD monitor
and DVR are consistent.
If the image is not positioned or scaled properly, please go to your monitor’s menu for adjustment.
For details, please refer to the user manual of your LCD monitor.
Power Supply
To ensure that your DVR works constantly and properly, it's recommended to use an UPS, Uninterruptible Power
Supply, for continuously operation. (Optional)
2. FRONT AND REAR PANEL
2.1. Front Panel
1) LED
Indicators
POWER : DVR is powered on.
HDD
: HDD is reading or recording.
ALARM : An alarm is triggered (Selected models only).
TIMER
: Timer recording is on.
PLAY
: Under playback status.
2) MENU
Press to enter the main menu.
3) ENTER
Press to confirm the setting.
4) LIST
To quick search the recorded files by event, press to show the event list.
Select one event, and press “ENTER” to playback the selected file.
