Safe Fleet PRIME DESIGN VRR-GM31G-ST, Быстрый старт

Страница: 9 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
9
Fig. G
View From Vehicle Front
Repeat Step 2.3
Repeat Step 2.3
Repeat Step 2.4
FRONT Z POST
4.1
Place the Front Z Post Clamp onto the top of the Front
Rotation Assembly, ensuring the Z Post Clamp seats
into the top groove as seen in Figure G below.
4.2
Repeat Steps 2.2–2.4 to complete the
assembly of the Front Rotation Z Post.
Close the right hand Slide Rotation then proceed to the
L and Z Post installation on the Left Hand Rotation.
4.3
VRR-GM31G-ST BO
X
ASSEMBL
Y INSTR
UCTIONS–L POSTS & Z POSTS