Safe Fleet PRIME DESIGN VRR-GM31G-ST, Быстрый старт

Страница: 8 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
8
View From Vehicle Front
Fig. F
M8 x 25MM T Bolt
M8 Locknut
Flat Washer
2.3
2.4
Torque to 90 in-lbs.
Place the T Bolt into the notched
portion of the Front Crossbar.
3.1
3.2
Slide the T Bolt toward the right
Rotation Base Assembly
FRONT L POST
Assemble the Front L Post onto the Crossbar and T Bolt using
the hardware shown below. Do not tighten until Step 3.5.
3.3
Torque to 90 in-lbs
3.5
Slide the Front L Post outward until it fully
contacts the Rotation Base Assembly.
3.4
Contacts here
Lightly tighten the Slide Z Post nuts, then finalize the
alignment of the front edge of the Slide Z Post to the
arrow as shown below in Figure F.
VRR-GM31G-ST BO
X
ASSEMBL
Y INSTR
UCTIONS–L POSTS & Z POSTS