Safe Fleet PRIME DESIGN VRR-GM31G-ST, Быстрый старт

Страница: 5 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
5
Starting with the Right Hand Rotation, use the 6 point
13MM socket, and loosen the four Barrel Nuts in
positions “A” two full turns counterclockwise.
0.1
ROTATION DEPLOYMENT
Installer’s Note: The Rotations on this Ship Thru rack are factory-
mounted inboard of the Crossbar ends. They must be repositioned to
the Crossbar’s end stops for proper operation and use.
A
A
A
A
Grasp the Drive Shaft in the shaded areas, then
evenly pull the Rotation outward to a hard stop.
0.2
B
B
B
B
Using the 6 point 13MM socket and a torque
wrench, tighten the Barrel Nuts loosened during
Step 0.1 to 150 in-lbs.
0.3
Repeat Steps 0.1–0.4 for
the Left Hand Rotation.
0.5
0.4
Press black caps into each Barrel Bolt hole
marked positions “B” on the Right Hand Rotation
Base Assemblies.
VRR-GM31G-ST BO
X
ASSEMBL
Y INSTR
UCTIONS–RO
TA
TION DEPLO
YMENT