Safe Fleet PRIME DESIGN FEA-0008, Руководство пользователя

Страница: 13 / 16

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
13
3
4
8
9
6
5
5
7
0.3
0.4
FEA-0008
ASSEMBL
Y INSTR
UCTIONS–LEFT SIDE CLAMP DO
WN
LEFT CLAMP DOWN
ASSEMBLY SEQUENCE
REAR CLAMP DOWN TUBE HOLDER
0.3
Remove Rear Tube Holder,
and retain for Step 0.9
FRONT CLAMP DOWN TUBE HOLDER
0.4
Remove Front Tube Holder,
and retain for Step 0.5
Loosen and remove this
Holder from the Rear
Clamp Down Tube.
Loosen and remove this
Holder from the Front
Clamp Down Tube.
Note: This Clamp Down Kit fits both Left
and Right sides.
These instructions on pages 13 & 14
show the assembly procedures required
to convert the factory-assembled Right
Side Clamp Down Assembly into a Left
Side Clamp Down Assembly.
The remaining assembly procedures are
mirrored and identical to the right side.
NOTE: Crossbars are shown with the
LH Clamp Down feature for illustrative
purposes only. Crossbars are not
included with this Clamp Down feature,
and must be purchased separately.
This Clamp Down Assembly can also be
assembled onto the left side using the
optional Mid Crossbar for the carrying
of step ladders. See page 4 for details
on how to configure according to your
Crossbar spacing.
NOTE: This Rear Tube
Holder has a red sticker
affixed to the backside
of the bracket
NOTE: This Front
Tube Holder does
not have a sticker