Align the hole in the Adjustment Bracket with the
top hole in the Upper Post; then insert the K Pivot
Bolt through the holes. Fasten with the L Nut, but
do not overtighten (the Top Platform must be able
to tilt freely).
Place the M Star Washer onto the stem of the
N Knob with Short Stem, and screw the Knob
through the slot in the Adjustment Bracket and into
the hole in the Upper Post.
8921-37: 2 of 2; 06/02
Safco Products Company, New Hope, MN 55428
Attach the F Adjustment Bracket and the G
Retaining Bracket to the H Top Platform, using
four I Small Screws. Be sure that the slot of the
Adjustment Bracket is facing the two small holes
along the front edge of the Top Platform.
3
Attach the J Paper Stop/Pencil
Ledge to the Top Platform, using the
two remaining Small Screws.
4
5
Level the unit using the levelers on the
Base.
Adjust the height by removing the
two Knobs, aligning the Posts to the
desired height, and reinserting the
Knobs.
Loosen the uppermost Knob, adjust
the Top Platform angle, and retighten.
6
Q
Q
Q
Q
Q
Q
Q
Q
SMALL HOLES
SLOT
Q
F
Q
H
Q
I
Q
J
Q
K
Q
L
Q
M
Q
N
Q
Q
G
