WAN-1240:
WAN-1212X / RM-126X:
Step 3: Insert the new hard drive into an available bay.
After you remove the bezel, you will see the drive bays. Depending on the model there are four to ten bays. Also,
depending on the initial configuration you may have several of the bays already filled.
Remove the plastic hard drive panel from the empty bay that you wish
to insert the new hard drive into.
Open the handle on the drive sled and slide the new hard drive into the
empty bay. Close the handle on the drive sled. It will click into place.
Step 4: Replace the bezel.
The two operating
system hard drives are
labeled 8 and 9 and are
located here
Drive bays
The two operating
system hard drives are
labeled 0 and 1 and are
located here
G1250V01D
Page 8
