PART 2: HARD DRIVE CONFIGURATION
Step 1: Power up the server and access the configuration utility.
Power up the server.
Once the “Poweredge Expandable Raid Controller BIOS” message appears, Press “Ctrl+R” wait for the prompt,
then press “C” to get to the “Virtual Disk Management” configuration utility.
[NOTE: If you miss this prompt, you will need to press Ctrl+Alt+Del and reboot the server to get back to this
option.]
NOTE:
If this is an operating system hard drive replacement, you may receive these messages:
Press ‘C’ to continue.
G1250V01D
Page 9
