SAF Lumina Series, Руководство по настройке

Страница: 78 / 123

12 12 System temperature fault Temperature is out of defined range
13 13 No data from main PSU ADC No data from the main PSU ADC
14 14 Main supply voltage failure Main supply voltage is out of defined range
15 15 Main supply current failure Main supply current is out of defined range
16 16 Main supply power failure Main supply power is out of defined range
17 17 No data from power supply ADC
No data from ADC connected via I2C
interface
18 18 1,0V failure Power supply voltage out of defined range
19 18 1,2V failure Power supply voltage out of defined range
20 18 1,5V failure Power supply voltage out of defined range
21 18 2,5V failure Power supply voltage out of defined range
22 18 3,3V failure Power supply voltage out of defined range
23 18 5,0V failure Power supply voltage out of defined range
24 18 Permanent 7,5V failure Power supply voltage out of defined range
25 18 Switchable 7,5V failure Power supply voltage out of defined range
26 18 12,0V failure Power supply voltage out of defined range
27 18 -5,0V failure Power supply voltage out of defined range
28 19 No data from RADIO
No data from radio (for future
compatibility)
29 20 Rx level alarm Rx alarm level is out of defined range
30 21 Tx PLL error alarm Tx PLL failure
31 22 Rx PLL error alarm Rx PLL failure
32 23 No data from MODEM
No data from MODEM connected via UART
interface
33 24 Acquire status alarm Modem acquire failure status
34 25 Last acquire error status Modem last acquire failure status
35 26 Radial MSE Radial MSE is out of defined range
36 27 LDPC decoder stress LDPC decoder stress is out of defined range
37 28 Tx ACM profile was changed ACM profile was changed
38 29 RX carrier offset Error in Rx carrier offset
39 30
No data from modem
temperature sensor
No data from modem temperature sensor
40 31 Modem temperature fault
Modem temperature is out of defined
range
41 32
ATPC Tx power correction was
changed
ATPC Tx power correction was changed
42 33
Rollback initiate system CPU
restart ==>
System restart was called by rollback [Only
rising]
43 34
System CPU reset was WDT
initiated ==>
System restart was called by watchdog
[Only rising]
44 35 PM log flash write error Error while writing pm log to flash
The CFIP Lumina Series Full Outdoor Unit Technical Description and Configuration Guide • Rev. 1.10 •
© SAF Tehnika JSC 2013