SAF FreeMile Series, Руководство пользователя

Страница: 51 / 91

The SAF FreeMile Series Full Outdoor Unit Technical Description and Configuration Guide • Rev. 1.3
© SAF Tehnika JSC 2012
51
Figure 4.31. QoS DSCP configuration
1. QoS 802.1p – enables or disables 802.1p priorities for all three ports – LAN, WAN
and Mng (command line – ethernet QoS 802.1p {[enable | disable <Port>] |
[map]} );
2. DiffServ – enables or disables DiffServ (DSCP) priorities for all three ports – LAN,
WAN and Mng (command line – ethernet QoS DSCP [enable | disable <port>] |
map) ;
3. Port based priority – allows passing packets from ports (LAN, WAN or Mng) directly
to a specific priority queue. By default port based priority queuing passes packets
from all ports to lowest (1) priority queue (command line – ethernet QoS port
<port> <priority>);
4. DSCP mapping – allows assigning queues for different DSCP classes. You may have
up to 64 different traffic DSCP classes;
5. Pressing “Apply” applies changes made to the corresponding section only for the
local side SAF FreeMile FODU. If “Rollback on” is selected, configuration will be
reverted in case of erroneous configuration changes applied;
6. ”Save” ‐ saves to configuration file all the changes made (command line – cfg write );
7. System returned ‐ in case of error or incorrectly entered parameter value, or other
problems on the whole page – the info message is being shown here. Otherwise it
says “Ok”.