SAF FreeMile Series, Руководство пользователя

Страница: 40 / 91

The SAF FreeMile Series Full Outdoor Unit Technical Description and Configuration Guide • Rev. 1.3
© SAF Tehnika JSC 2012
40
1. FTP service – starts FTP service for file access and software update of your FreeMile
FODU. By default FTP service is not running (command line – net start ftp );
2. TFTP service – starts TFTP service for file transfer between both FreeMile FODU link
sides. By default TFTP service is not running (command line – net start tftp ).
4.3.3 Static route configuration
Figure 4.14. Static route configuration
1. Static routes – shows the list of existing static routes, as well as allows you to
choose specific route you are willing to change or delete. By default there is one
route which depends on earlier entered IP settings (command line – net route );
2. Network address – allows specifying network address for the route changing/adding
(command line – net route add|delete <dest addr> [MASK <mask>] <gateway> );
3. Network mask ‐ allows specifying network mask for changing/adding the route
(command line – net route add|delete <dest addr> [MASK <mask>] <gateway> );
4. Gateway ‐ allows specifying gateway for the route changing/adding (command line
– net route add|delete <dest addr> [MASK <mask>] <gateway> );
5. After entering addresses or selecting a specific route, buttons “Add”, “Change” and
“Delete” allow you to modify SAF FreeMile routes. If “Rollback on” is selected,
configuration will be reverted in case of erroneous configuration changes applied.
6. Save ‐ saves to configuration file all the changes made (command line – cfg write );
7. System returned ‐ in case of error or incorrectly entered parameter value, or other
problems on the whole page – the info message is being shown here. Otherwise it
says “Ok”.
(!)
Do not make any changes to default route; otherwise, management connection to SAF FreeMile will be lost.